Husqvarna 281

[Weejosh]

I'm building a 281 from a 181se parts. So it's a 281 crankcase, 288 cylinder, 181se carb and a 181se fuel tank but I'm stuck at the throttle linkage as the 181 linkage dosnt fit can anyone help. Would just getting the linkage in the Ebay picture solve my problem

 

[srcarr52]

You'll need a 281/288 style carb as well that has the roller to contact the 281/288 throttle arm.

Or you can grind on the case to clearance it so the 181 arm can return back to the idle position.

 

[Weejosh]

You'll need a 281/288 style carb as well that has the roller to contact the 281/288 throttle arm.

Or you can grind on the case to clearance it so the 181 arm can return back to the idle position.

Thank you I'll try and get a carb before I start grinding anything