singinwoodwackr
Well-Known OPE Member
I finally got my order of dogs in the other day. ( see info in the 2100 thread)
While these are mainly for the 2100/2101 series saws, they should work fine for others with the same case and clutch covers.
price: $12/dog
shipping: whatever's cheapest but should be in the $5-8 range for the lower 48. I can figure out other locations as needed.
I’m not selling hardware or rollers. I got the lock nuts and bolts at my local hardware store and the rollers online.
See thread for details:
The inner dog will fit the 380/480 saws BUT....the outer dogs do NOT line up. I have a 480 so was able to confirm this.
AND, I do not have a 285, 298 or 1100 saw to check on but in looking at the IPLs they should work fine. I know the inner will work on all of these but am not 100% sure about the two outers.
If you have one of those models and would like to try a pair for fit, let me know.
While these are mainly for the 2100/2101 series saws, they should work fine for others with the same case and clutch covers.
price: $12/dog
shipping: whatever's cheapest but should be in the $5-8 range for the lower 48. I can figure out other locations as needed.
I’m not selling hardware or rollers. I got the lock nuts and bolts at my local hardware store and the rollers online.
See thread for details:
Got the 2nd prototype set today.
Everything seems to work as planned.
27 49 cover with the Husky 372 style roller.
Same with 395 style roller
Everything seems to work as planned.
27 49 cover with the Husky 372 style roller.
Same with 395 style roller
22 54 with Stihl type roller (AM)
Looking at around $12ea plus some shipping, depending on their final price for a bulk order.
Just the dogs. Hardware can be found at any decent hardware store like ACE.
Rollers can be found on EBay, both husky type and Stihl.
Looking at around $12ea plus some shipping, depending on their final price for a bulk order.
Just the dogs. Hardware can be found at any decent hardware store like ACE.
Rollers can be found on EBay, both husky type and Stihl.
The inner dog will fit the 380/480 saws BUT....the outer dogs do NOT line up. I have a 480 so was able to confirm this.
AND, I do not have a 285, 298 or 1100 saw to check on but in looking at the IPLs they should work fine. I know the inner will work on all of these but am not 100% sure about the two outers.
If you have one of those models and would like to try a pair for fit, let me know.
Last edited:
