WANTED Homelite xl98 p/c

[ErnieG]

Looking for a Homelite xl98 piston and cylinder ..let me know if have these parts to sell .
Thanks
Ernie

 

[ErnieG]

Anything out there ....still looking!
Thanks
Ernie

 

[Yukon Stihl]

What cc are those?
Any pic's of the saw?
Is there another model that would interchange?

 

[ErnieG]

Here some some specs I dug up from the internet...
Im not 100 percent but I did read that the piston and cylinder will interchange with the xl925 .
Maybe someone with more knowledge can chime in and verify that .
Thanks very much!
Ernie

 

[ErnieG]

Here's a pic of the saw ....this isn't mine but the same model ..

 

[Lcfd1124]

I found a piston on ebay. I just bought a nos carburetor for mine off of ebay

 

[ErnieG]

I did see the piston on eBay but I was hoping to find a nice used OEM before going that route .

Ernie

 

[Yukon Stihl]

Cut off saw thats what threw me.
it is the same family as the 925 which is the biggest cc
i have one that is the 52 mm i think,have you verified the size of your yet?

 

[ErnieG]

It's 52mm ...here is a few pics of the p/c
Let me know if it looks like what you have .
Thanks very much!
Ernie

 

[Yukon Stihl]

It wasn't where i thought it was...
can you save your cylinder?
I will keep an eye out as i clean up

 

[ErnieG]

I'm not sure if mines salvageable or not ... There are a two chuncks missing one below and one above the exhaust port...the one below is larger .
Here is a pic ...let me know what you think

 

[Yukon Stihl]

Found it but it's the 51mm

 

[ErnieG]

Well if that 51mm fits I may be interested if your willing to sell it .
If it's possible could you post a few pics.
I don't know for sure if it will fit or not ...maybe someone could confirm it will .
I don't really have any other options by the looks of it .
Thanks

 

[Yukon Stihl]

here it is

 

[ErnieG]

I'll send you a p.m Yukon

 

[Duke Thieroff]

Give me a call, I have a complete saw in the shop I'd let go....likely has a good top end....