High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

Help needed extracting snapped cylinder cover bolt on 036

hoss29860

OPE Member
Local time
5:56 PM
User ID
30615
Joined
Nov 28, 2024
Messages
2
Reaction score
2
Location
North Augusta SC
Country flag
Ok I found a 036 at the local flea market piston and cylinder looks good it was missing the carb and ignition coil also found out that someone has snapped off the stud on the cylinder that the top cover locks on to . Has anyone had any luck removing broken ones and maybe has a few tricks to share I'm all ears
 

Agent Smith

Hack of all trades
Local time
5:56 PM
User ID
5180
Joined
Jan 28, 2018
Messages
3,122
Reaction score
18,557
Location
Northeast ohio
Country flag
You have a welder? If so, I'd try this method on that cover stud. I had a 026 with a broken cover stud and this method worked.


If no welder then drill a small hole in the center, apply penetrating oil, tap in a small broken bolt extractor, heat the area and try removing. Worst case, you'll have to drill out the stud, repair the hole with a helicoil and install a new stud.
 

av8or3

So many saw ... so little time...
GoldMember
Local time
5:56 PM
User ID
9318
Joined
Apr 24, 2019
Messages
2,013
Reaction score
8,505
Location
Waleska,Ga.
Country flag
Remember, heat is your friend.
 
Top