Fryedaddy
New OPE Member
- Local time
- 10:58 PM
- User ID
- 26805
- Joined
- May 28, 2023
- Messages
- 2
- Reaction score
- 0
- Location
- Ashland City, TN, USA
I have an Echo 440-CS, it's been a great saw over the years. Last week it was running great, then it died and I haven't been able to get it started since.
I gave it a tune up, new carburetor, plug, filters, etc.
It has vacuum and spark and fuel is getting to the carb, but it seems as though it's not getting into the cylinder? I can hit it with a squirt of starting fluid and it will fire, but won't run. I have not check it with a compression gage, but it feels like the compression is normal when I pull it.
I'm stumped.
Thanks,
Tom
I gave it a tune up, new carburetor, plug, filters, etc.
It has vacuum and spark and fuel is getting to the carb, but it seems as though it's not getting into the cylinder? I can hit it with a squirt of starting fluid and it will fire, but won't run. I have not check it with a compression gage, but it feels like the compression is normal when I pull it.
I'm stumped.
Thanks,
Tom