t4driller
Daddy Day Care
- Local time
- 2:07 AM
- User ID
- 927
- Joined
- Feb 23, 2016
- Messages
- 1,470
- Reaction score
- 5,589
- Location
- Southwest pa
First up is a Husqvarna 359. It's in pretty nice shape but has a couple scuffs and scratches. I did a base gasket delete, muffler mod, and metal intake clamp. I put a meteor piston in it because when I had it apart I dropped the piston and took a chunk out of the skirt. Other then that it's all oem. Oem dual felling spikes. $270 PayPal F/F plus the ride.
2nd in line is a jonsered 2145 I converted to a 2150. Has a 45mm 350 cylinder and flat top piston. Piston was used with a new oem piston ring. Muffler mod and metal intake clamp. If you don't like the muffler I have a aftermarket I could throw on instead. I stripped the one muffler bolt, so I tapped it to 6mm and put a 6mm muffler bolt in it. Has some wear and tear but runs pretty good. One of my favorites to use because it's so light but packs a punch. $125 PayPal plus the ride.
3rd is a pioneer 1074. It's in pretty nice shape and runs good. I only made 1 or 2 cuts with it then put it on a shelf. There's a Crack and a chip in the air filter cover. Handle has some scrapes/rash on it. Other then that everything looks to be in good shape. $65 PayPal plus the ride
4th is a echo 351 vl. It does run and fires right up. I didn't make any cuts with it. It's dirty and ugly. Clutch cover is broke around the one mounting screw. I'll let the pics say the rest. Make offer.
5th is a Poulan 245a. It does run but haven't made any cuts with it. It sounds pretty cool and is very loud. Its missing the air filter, but other then that it's complete. Has some mag rot on the bottom. Most of the paint is still there. $65 plus the ride.
I'm trying to free up some funds before the holidays and before baby is due in a week. Wife hasnt worked in a month. But if you need anymore pics or questions let me know. I'll try to post video of the 359 and 2150 I took on Sunday. Thanks Mike.
2nd in line is a jonsered 2145 I converted to a 2150. Has a 45mm 350 cylinder and flat top piston. Piston was used with a new oem piston ring. Muffler mod and metal intake clamp. If you don't like the muffler I have a aftermarket I could throw on instead. I stripped the one muffler bolt, so I tapped it to 6mm and put a 6mm muffler bolt in it. Has some wear and tear but runs pretty good. One of my favorites to use because it's so light but packs a punch. $125 PayPal plus the ride.
3rd is a pioneer 1074. It's in pretty nice shape and runs good. I only made 1 or 2 cuts with it then put it on a shelf. There's a Crack and a chip in the air filter cover. Handle has some scrapes/rash on it. Other then that everything looks to be in good shape. $65 PayPal plus the ride
4th is a echo 351 vl. It does run and fires right up. I didn't make any cuts with it. It's dirty and ugly. Clutch cover is broke around the one mounting screw. I'll let the pics say the rest. Make offer.
5th is a Poulan 245a. It does run but haven't made any cuts with it. It sounds pretty cool and is very loud. Its missing the air filter, but other then that it's complete. Has some mag rot on the bottom. Most of the paint is still there. $65 plus the ride.
I'm trying to free up some funds before the holidays and before baby is due in a week. Wife hasnt worked in a month. But if you need anymore pics or questions let me know. I'll try to post video of the 359 and 2150 I took on Sunday. Thanks Mike.
