SOLD CFB MS440/460 hybrid

[Woodslasher]

Up for sale is a CFB MS440/460 hybrid. I got this saw in a trade with another member and installed a new Maxflow kit, a new oem fuel tank (the old one was tweaked), and a new oem Stihl 3/4 wrap. I've run a few tanks through it and I really enjoy the saw but it just isn't the right fit for me. I'd like to get $900 + the ride for it but I'm open to offers.

 

[Woodslasher]

 

[Woodslasher]

I also have a 32" Stihl lightweight 3/8 x 0.050 bar that was used for ~6 test cuts, as well as two Oregon 3/8 x 0.050 full skip, full chisel, square-ground chains I'd include for an additional $200 + the ride. One of the chains is new, never used and the other was used for ~6 test cuts. I can get pics of the bar/chains if anyone wants. NOTE: This is only for sale with the saw, I will not sell it separately. If it doesn't sell with the saw I'm lengthening the slot and running it on my 372 with an adapter.

 

[davidsparks]

PM Sent

 

[RI Chevy]

Mike builds a strong Hybrid saw. His attention to detail is 2nd to none! There is a tremendous amount of work that goes into building one of these. They are great runners. Whoever buys this is getting a bargain, and a great saw!

 

[Woodpecker]

I also have a 32" Stihl lightweight 3/8 x 0.050 bar that was used for ~6 test cuts, as well as two Oregon 3/8 x 0.050 full skip, full chisel, square-ground chains I'd include for an additional $200 + the ride. One of the chains is new, never used and the other was used for ~6 test cuts. I can get pics of the bar/chains if anyone wants. NOTE: This is only for sale with the saw, I will not sell it separately. If it doesn't sell with the saw I'm lengthening the slot and running it on my 372 with an adapter.

Be interested to hear how the slot lengthening goes if it happens. Werd on the street is there isn’t much meat there before you get into the hollow/honeycomb material… Maybe post up a thread if you end up doing it.

 

[Woodslasher]

Be interested to hear how the slot lengthening goes if it happens. Werd on the street is there isn’t much meat there before you get into the hollow/honeycomb material… Maybe post up a thread if you end up doing it.

It's looking like the bar will be heading out with the saw so I doubt that'll happen. However, if I do wind up doing that I'll report back.

 

[thinair]

I just put a 32'' Stihl light on my 385. With the 105 driver chain and 7t driver, I had to file about .050 out to lengthen the slot....

 

[Woodslasher]

Saw and bars/chains are sold!

 

[RI Chevy]

Excellent!!!