Bar mount question

[Mark71gtx]

I have an Echo 4600 I plan to sell soon. I find it is difficult to sell saws pho around here. I would like to get a cheap bar for it, but I want to make sure I get the correct one. Mike Carr's site says it takes A041 mount and the top cover says to use 33S chain. I have a few A041 bars here, but none are .325. I mounted one and I don't see how the oiler hole would be able to oil the chain. The bar covers the groove. Am I missing something? I was thinking a 16"-18" bar should be about right for this saw. Any suggestions?

 

[Jimmy in NC]

I have an Echo 4600 I plan to sell soon. I find it is difficult to sell saws pho around here. I would like to get a cheap bar for it, but I want to make sure I get the correct one. Mike Carr's site says it takes A041 mount and the top cover says to use 33S chain. I have a few A041 bars here, but none are .325. I mounted one and I don't see how the oiler hole would be able to oil the chain. The bar covers the groove. Am I missing something? I was thinking a 16"-18" bar should be about right for this saw. Any suggestions?

Let an echo fan know you are going to sell an echo... text him the picture... he will respond with pictures of some big cc Husky saws... then you talk and barter.

Bet you could do that with a clown in Clayton....

 

[Mark71gtx]

I may have to send you some pics... I have a CS-302 that is pretty nice and a CS-500 VL that is missing a lot of parts, but is NOS. I also have a bag of other CS-302 parts from a saw I stripped...

 

[Red97]

dibz on the 5000 price pending, heck same applies for the 4600....

 

[Mark71gtx]

There have been private dibz, but you are now in line.