HUSQVARNA 55 Rancher

[Burchie70]

I have a Husqvarna 55 Rancher EPA I believe it’s 2003 and I need to order some parts for it. I checked the compression and it’s at 170 psi but it runs rough. I want to order a carb rebuild kit, spark plug, gas line and fuel filter. I also have a couple anti vibe mounts I should change. My question, where is good place to order Husqvarna parts that are reasonably priced ?

Thanks for any help

 

[USMC615]

HL Supply...right here on site. The @Gentleman that runs this site...his store in Fla.

 

[USMC615]

See that ‘Husqvarna OEM Parts’ ad in the top center of the forum home page...click on it.

 

[Burchie70]

I have another question as I’m looking at parts diagrams. What’s the difference with the numbers for 55 rancher epa? Example 1998-08, 2006-02, 2007-02, 2000-05, 2004-01 ?

 

[Burchie70]

Thanks USMC615

 

[CJ Brown]

I have another question as I’m looking at parts diagrams. What’s the difference with the numbers for 55 rancher epa? Example 1998-08, 2006-02, 2007-02, 2000-05, 2004-01 ?

This page should provide all the parts lists you need for your 2003 55 Rancher EPA
Be aware that sometimes the numbers in the price list don't correspond to the numbers on the parts diagram because some parts have been superceded over the years. You will figure it out.
https://www.firedog.com/catalog/husqvarna/chain-saw/55-rancher-epa-2000-05

 

[Burchie70]

Thanks CJ I’ll check it out

 

[Gizzard]

I have another question as I’m looking at parts diagrams. What’s the difference with the numbers for 55 rancher epa? Example 1998-08, 2006-02, 2007-02, 2000-05, 2004-01 ?

The 1998-08 would be current parts list for Rancher's built August of 1998. I usually pick parts list that is closest or just prior to build date of saw that working on.

 

[Gizzard]

https://www.ahupd.com/husqvarna-chainsaw-parts-models

At the link above I would pick the 55 EPA (2000-05) for your saw when looking at part numbers. As mentioned above HL Supply (sponsor here) should be able to help you for that model.

 

[5155]

The plastic intake partition,
intake manifold boot,
and impulse grommet
Are highly replaced items also.

Babysit the female threads on the plastic partition.

 

[Burchie70]

Thanks for all the help