SOLD 350 OE

[JohnnyBlade]

Like title states. 44mm bore.
Runs and oils as it should. Brake works. ZERO MELT. Prob the nicest ive ever seen.
New:
Mahle piston
Fuel Line
Impulse line
Fuel Filter
346 muffler bracket mod
True Blue cord
High temp paint on muffler/brkt.

Saw has:
BGD
.030 TA
MM under stock deflector, screen still in place
Plugged/motsealed decomp
359 dog
I went through the whole saw and cleaned every part in my parts washer. Bearing/seals removed and motosealed in along with cup. Cut 3/16" off bolts on bearing cup and head.
Kinda the trick with these cuz ive heard of the bolts bottoming before actually being tight. The only thing that is not right/ but not hurting either is there is a small piece broke off the A/F housing that the choke rod slides through. Outcome is that the choke rod wiggles a lil more than normal. I would of taken a pic but its on the bottom and u cant see it. If i had another housing i would of changed it. Kind of a non isssue but fully disclosing it. Lets say $225 FnF or add 3% plus shipping.

 

[JohnnyBlade]

 

[JohnnyBlade]

And they got me them basstages!!!

 

[JohnnyBlade]

Watch “350 OE in dry hard Hickory” on Vimeo:

Sent from my iPhone

Aint keeping me down Pootube
Oh and i modded a metal chain catch on it as well. This video is with .0325 lpx and 18" sword

 

[malk315]

May be interested in this for a friend and his wife. Would really be the wif'e's saw and she's strong could handle the saw with confidence.

Does this saw have the metal intake clamp update? I think I see a metal clamp in the pic.
Seems all ready to go -- nice 350.

 

[JohnnyBlade]

May be interested in this for a friend and his wife. Would really be the wif'e's saw and she's strong could handle the saw with confidence.

Does this saw have the metal intake clamp update? I think I see a metal clamp in the pic.
Seems all ready to go -- nice 350.

Cool! Thanks for passing the word out for me. Yes it does. I forgot that was another mod i had done. Thanks for catching that! I new i forgot something. Yes ready to cut. Oh and limiters disabled.

 

[malk315]

Cool! Thanks for passing the word out for me. Yes it does. I forgot that was another mod i had done. Thanks for catching that! I new i forgot something. Yes ready to cut. Oh and limiters disabled.

Wow -- you have thought of everything. Like how it has the muff bracket and the base seal all done and metal intake all done... Limiters too!

So it's $225 and then 3% if you need to ship? Apologies I don't know what FnF means.

 

[malk315]

Wow -- you have thought of everything. Like how it has the muff bracket and the base seal all done and metal intake all done... Limiters too!

So it's $225 and then 3% if you need to ship? Apologies I don't know what FnF means.

I figured it out -- Friends and Family. All good.
Let me check w/ my buddy tomorrow. This is in his budget even if we have to add shipping.
I'll probably get him a new Oregon 18" w/ 21LPX chain... should be a fun saw for him and his wife... but it will be the wife's saw LOL.

 

[JohnnyBlade]

Wow -- you have thought of everything. Like how it has the muff bracket and the base seal all done and metal intake all done... Limiters too!

So it's $225 and then 3% if you need to ship? Apologies I don't know what FnF means.

On paypal its friends and family. Like a gift. No fees. Goods and services (which has buyer protection if the seller flakes) charges 3% of the selling value to the seller. So i just put it both ways to give the buyer the option to pay the 3% extra for their saftey. Shipping is extra.

 

[malk315]

And wondering one more thing -- she have a black coil and thus unlimited? Used to seeing blue limited coils on these but thinking this one may be old enough to have an unlimited which would be so sweet.

 

[malk315]

On paypal its friends and family. Like a gift. No fees. Goods and services (which has buyer protection if the seller flakes) charges 3% of the selling value to the seller. So i just put it both ways to give the buyer the option to pay the 3% extra for their saftey. Shipping is extra.

I've seen you around the forum and would buy w/ confidence w/ Friends and Family to save the fees and you get all of the $$$ LOL.
Good stuff. This is great timing -- he was looking for saw and this looks like a great option. We can set her up and they can have at it. I'm a good local resource if they need anything as I'm a mile up the road. I'll check w/ him tomorrow and I'm quite confident we'll be pulling the trigger.

 

[JohnnyBlade]

And wondering one more thing -- she have a black coil and thus unlimited? Used to seeing blue limited coils on these but thinking this one may be old enough to have an unlimited which would be so sweet.

I can look tomorrow but im pretty sure its unlimited. Can remember offhand. Its sweet spot was right around 13,500.

 

[malk315]

I can look tomorrow but im pretty sure its unlimited. Can remember offhand. Its sweet spot was right around 13,500.

Nice -- more curiosity as these run well at 13K ish. On my personal 350 w/ a limiter trim and like 1/8 beyond on H needle where the limiter used to stop it she's awesome. She can stand in for our 2 x 346 easily. I got that one off e-bay and a total winner

I'll be in touch tomorrow. Thanks man!

 

[JohnnyBlade]

I've seen you around the forum and would buy w/ confidence w/ Friends and Family to save the fees and you get all of the $$$ LOL.
Good stuff. This is great timing -- he was looking for saw and this looks like a great option. We can set her up and they can have at it. I'm a good local resource if they need anything as I'm a mile up the road. I'll check w/ him tomorrow and I'm quite confident we'll be pulling the trigger.

Ya i tend to hang around here
Sounds good to me! Ill pencil ya in as first in line. Now i got to seepy and dream of chainsaws

 

[malk315]

Ya i tend to hang around here
Sounds good to me! Ill pencil ya in as first in line. Now i got to seepy and dream of chainsaws

GOOD MAN! Sure if you can hold her for me til tomorrow I appreciate it. Sweet dreams!

 

[East/West CADaddict]

Wanna buy the saw simply because sword was used in description of sail. Secondly, how do I contact you to sail any future saws I may have with your PURE white back drop. Can I green screen my *s-word to you and some post production work is done.....??? Sorry Corona'ed out and on a mountain in Santa Cruz. Not thread *s-wordting, loves everything about this post. GLWS

 

[USMC615]

Nice 350...at this price it won’t take long. See brother @malk315 is on it!

 

[malk315]

I talked to Nick and will acquire this saw for my buddy. Maybe start of new CAD, we shall see!

Sent from my Pixel 3 using Tapatalk

 

[JohnnyBlade]

Wanna buy the saw simply because sword was used in description of sail. Secondly, how do I contact you to sail any future saws I may have with your PURE white back drop. Can I green screen my *s-word to you and some post production work is done.....??? Sorry Corona'ed out and on a mountain in Santa Cruz. Not thread *s-wordting, loves everything about this post. GLWS

This made me laugh! I enjoy thread shatting. The back drop is just cardboard and butcher paper. Lol! First time in a LONG time i didnt get a deer this year so i figured id just use the paper id normally use for something productive.

 

[JohnnyBlade]

Nice 350...at this price it won’t take long. See brother @malk315 is on it!

Thanks Bub @malk315 is on it like white on rice. I just got to get her boxed for him and wer done. Long day at the office for me. Be boxing shortly