WANTED 14mm Stihl bars 24-36"

[HumBurner]

I'm looking for new or very-good-used 14mm, 3002 mount stihl bars for an 076. I'd prefer bars in the 24-36" range, but might be interested in others. 32-36" is a definite.

.404 pitch preferred, but I'll consider 3/8.

 

[Woodwackr]

Let me know if you find extras

 

[HumBurner]

Let me know if you find extras

Will do.

I have a few places to check in a few different towns nearby.

 

[Woodwackr]

Will do.

I have a few places to check in a few different towns nearby.

I just need something shorter than a 60 to test out an 880 I picked up
Don’t have to be pretty…I restore bars all the time.

 

[Shane¹]

I have a 30-36 inch Windsor bar that is that mount but the oil holes have been drilled different for a dolmar but still should work I think. I also have a whole pile of new 20 inch hard nose oregon bars if either of you are interested in those I can send some pictures later

 

[lehman live edge slab]

I’ll look what I have, I know I have a few large mount bars with all my 08’s and others when I bought stuff from the local guy when he quit. Hard nose or just sprocket?

 

[ManiacalMark]

Stihl brand only?

 

[HumBurner]

I have a 30-36 inch Windsor bar that is that mount but the oil holes have been drilled different for a dolmar but still should work I think. I also have a whole pile of new 20 inch hard nose oregon bars if either of you are interested in those I can send some pictures later

Let me know what size it is, it might be worth trying.

I’ll look what I have, I know I have a few large mount bars with all my 08’s and others when I bought stuff from the local guy when he quit. Hard nose or just sprocket?

I'd prefer replaceable sprocket tip bars, but I may have to accept hard-nose bars.

This will be strictly for milling.

Stihl brand only?

Doesn't have to be, so long as it fits and oils.

 

[Woodwackr]

Replaceable tip, no brand specific, .404 .63g for me.

 

[Shane¹]

Here is the bar it's 29 inch Windsor

 

[Shane¹]

Here is the 21 inch hard nose I

 

[Bill G]

Mine are in the 60 inch range.

 

[HumBurner]

Here is the bar it's 29 inch Windsor View attachment 442947

View attachment 442948

View attachment 442950View attachment 442949

Is that a chip in the bar-rail or a wear spot?

 

[Shane¹]

I am not sure where you are talking about someone drilled the oil holes all the way through so I welded it up and ground it back off

 

[HumBurner]

I am not sure where you are talking about someone drilled the oil holes all the way through so I welded it up and ground it back off

I think that is the large shiny spot you focused on in the photos above.

Is it .404 tip?

 

[Shane¹]

It is what I zoomed in on. It has a 3/8 but if you are really interested in can swap a 404 on I have a tip here

 

[HumBurner]

It is what I zoomed in on. It has a 3/8 but if you are really interested in can swap a 404 on I have a tip here

What are you thinking for price, with and without the tip swap?

 

[Shane¹]

I have no idea what it is worth shoot me an offer

 

[HumBurner]

I have no idea what it is worth shoot me an offer

That's a lot of pressure for a guy!

I'll think on it. I've been looking at a lot of different places, and prices are all over the map.