WANTED 028 cylinder and piston

[J. Dirt]

Looking for an 028av woodboss p/c

 

[Bomar]

I might have a good one on a part saw, let me check today.

 

[J. Dirt]

 

[J. Dirt]

Forgot to ask if you can see what size bore too?

 

[lehman live edge slab]

I have one I’m sure if you need it, I think they are all standard bore but might have one super.

 

[timg]

Just a word of caution. It could be a 42 or 44mm bore in the AV or Woodboss. The 028 Supers were 46mm. Just saying. TG

 

[lehman live edge slab]

Yeah and I have a super just need to clean up and see if it’s good.

 

[Bomar]

OP what size bore is yours

 

[lehman live edge slab]

The one is a super bit I need to clean up and make sure it’s good. The supers were all 46mm

 

[lehman live edge slab]

I also have some standard and I think they are the 44mm

 

[timg]

When the dust settles on all this and J Dirt gets what he wants I may be interested in the 46mm cylinder. Now if you guys don't have a 42 or 44 mm cylinder. Contact me J Dirt. I think I could help. Will know tomorrow. This is not a HIJACK

 

[J. Dirt]

HIJACKED!!

Hahaha just kidding!! I got what I needed plus another new project!! The one I’m working on is an 028av woodboss and it’s got the 44mm p/c. The saw looks great, but the flocking is half off the filter and it must have been sucking dust for quite a while and ground the piston and cylinder pretty bad on the intake side.

Keep this going if you guys need to do some swapping.