Manual gearbox oil change [IMG]
Stihl 3/8LP , 0.43 "mini" picco vs 0.50" chains side by side. The MS 170 owner was satisfied, stays sharp and last longer. .050" 3/8LP chains are...
This needs a new handle [IMG]
That Metabo / CAS was a good idea, there are already many manufacturers. (US "Metabo HPT" = Old Hitachi). The Bosch pro "Alliance"...
I also took old laptop battery cells 20 years ago, and the last ones around 2012 when the T20 motherboard broke or something( service manual, vcds...
It is a well-designed small, compact pro saw, from the 90's 020 (1129)> MS 200. I bought a used one (MS 200 ) about 20 years ago.[IMG]
A little firewood work today. Not much left, (big truckload when I started)[IMG] Saturday sauna warming up [IMG]
Angle grinder service [IMG] Stihl has manufactured magnesium parts for power tools.
Check spark screen on muffler
A couple of hours today. The weather is good +19C (7pm) Finland, North Savo[IMG] [IMG]
I had one "new" 339 many years ago, stihl was better in handling / cutting performance. The MS 200 sold really well here [IMG]
026 / ms260, many years ago. [IMG] [IMG]
No more oil leaks. I used a sealant between the oil pump & rubber.
vac/pressure test ok, ( new intake boot, carb cleaning, rear handle jb weld repair ) 150-160psi [img] [MEDIA]
combi can in use, another identical from the 80s [IMG]
You can disassemble it and replace worn / bad parts. I just replaced the bad bearings, grease. (another model ) I think there is some basic...
A little more firewood. 346 + 95TXL chain [IMG] [IMG] [IMG] The snow came a week ago
New AV rubbers for my 026 late model (I bought it used in 1999). I think oem is clearly better. [IMG] [IMG]
2x ms 260 (€ 50) never cleaned properly. The starter was partially stuck, lots of dirt under the clutch drum, around the carburetor, ribbed intake...
I can't fix this masterpiece. [IMG]
Separate names with a comma.
