I don’t have any large test wood so I’ll run a large sprocket to load the saw heavily.
It’s raining here. And the stock clutch cover won’t even clear a 9 pin. I’m going to have to cut back this plastic bumper.
This one came from over seas.
I’ll just leave this here.
I have in the past but their isn't as much demand for those. Also I don't have the tooling to make a 58 gauge groove so I've had to make them 50...
Another 562, the last one for a while. This one is mine unless someone really wants it.
More handpieces back in stock. Plenty of burrs.
Yes, they work with the Foredom motors.
I made them, here is the thread I made about them....
You need something like the one on the bottom? I hope to finish another run of them tonight.
Bump, open to offers.
That usually means the wheel center is directly over the table centerline. There is a stop bolt on the bottom of the arm you can use to adjust...
I’ve never raised the lowers on a 395.
It looks like you are trying to utilize more flow through the piston windows instead of from under the pin boss bridge.
It could be a fuel delivery problem, clogged fuel filter or clogged tank vent.
I'd get it to act up and then pop the tank cap to relieve any...
Making a complete grinder is on my backlog of things to do. So anything you'd like to see done differently or any suggestions are welcome.
I recently built an 046 for myself but I haven't started it since I tested it. I don't cut much anymore and I'll grab my Huskies when I do because...
If anyone is interested I have modified carbide and diamond burrs back in stock.
Also since feedback, although limited, has been positive so I’m...
Why not a 2100 crank too?
Separate names with a comma.