ZERO's latest activity
-
Looks like a rebranded Hyway kit. Probably from the same factory as Hyway. It could even be a guy who has his own packaging and is... -
Thanks for the recommendation. I went ahead and ordered a cap.
-
ebay-see saw run 036 filler cap I have bought a couple thing from these guys for an 026 and 036. All have been correct
-
Looking for an oil cap for Stihl 036 NOS.
-
My MS-250 is the loudest in my fleet, even more than my ported Echo 500. Only mod I did was open up the fishgill slots on the muffler a...
-
ZERO reacted to dangerousatom's post in the thread Muffler Mods and Increased Decibels??? with
Like.
Wondering 🤔 if welding a 90 inside the muffler box but shooting it straight out would cover all the bases. . . -
More like, can be loud, if the hole is past the deflectors edge. If kept well within they are quite manageable.
-
huh? I can't hear ya
-
Side Ports are Loud, but not as Bad as direct inline with exhaust port...
-
He knows more than the average bear.
-
Tree Monkey claims that the front cover exits provide for less torque. I think he is right.
-
This! I am actually working on modded muffler for the 400C that will be quieter. I have the material , I just need to get it welded up.
-
I continued on the unidentified Disston today, interesting fuel and pulse set up. The fuel valve and fuel pump are located on the...
-
I have a Von Ruden hydraulic and a Von Ruden mechanical, PTO driven saw but not specifically the one you show above. I also have a...
-
Intentionally? Any downside to running it or is it too little to matter?