ZERO's latest activity
-
Maybe someday, someone would come up with a relatively simple to use diagnostic tool to check these type of things out, like in the... -
I don’t think so. It’s computer code *s-word I believe. Had a 572 that would start and idle like it was in the choke position on at3. Pull...
-
That is if it can run at all. Otherwise maybe a resistance check if it is not running maybe?
-
Interesting, I wonder if something like a simple voltage check would tell anything or not?
-
I didn’t really. Don’t actually know if it can be diagnosed without the SDS software. The brain is in the coil. Many of the issues we...
-
How did you diagnose the coil. In the good old days they were interchangeable and I had multiple saws to swap parts around. These dumb...
-
All I know is I’ve seen a half dozen mtron and autotune coils go bad but never a carb itself other than diaphragms. After buying a few...
-
I’m getting a carb kit whenever it gets here and I’ll check out the wiring before them. If it revs and restarts is it safe to assume the...
-
I would test them for continuity with a multimeter. Try bending and twisting them to see if there is a break. Also check from red to...
-
I swapped a white solenoid to see if anything changes, nothing. How to you diagnose the other electrical parts? It has spark and fuel to...
-
The fuel pump looks to be worn out as well, could not be good in combination with the stiff metering diaphragm. All the above...
-
Check you haven't semi pinched your fuel line.
-
Clean/rebuild the carburetor and put a new fuel solenoid on it like mentioned. If that doesn’t do it, it’s more likely that it’s...
-
If this were mine, I'd swap a solenoid and kit the carb. But everyone knows I'm just an unskilled hammer donkey.
-
Like won't rev at all ? Falls on it's face? Spits and sputters or what ? I will say that mine is fuel filter sensitive. The only saw...
