ZERO's latest activity
-
Yep, it's just surface coloration. Even color case hardening on firearms, which is a much more involved process that penetrates somewhat... -
Did a quick test on a ‘scrap’ bar: Blue line came right off with a little buffing, using 320 grit, ‘Wet-or-Dry’ sandpaper. Also came...
-
Perhaps my use of the natural finish bars was to general in nature. The Sugihara light and Huskie tough light bars as well as a...
-
All my actual “user” saws have a scrench holder on the handle. I drill a hole in it and stick a Stihl screwdriver in it too.
-
He said peak rpm, not factory max no load... I have had hated saws that I intentionally tried to kill/blow up with carb screws. No...
-
I’m always giving things a tweak here or there. Big bar in big wood, more richer. Drive 30 minutes and I’m up at 10k ft, less richer...
-
The Stihl MS260 Pro had a fixed jet Carb. At least some years did. The saw was a complete turd with that fixed jet carb. Install a WT194...
-
A twenty degree swing in temp is a big differance. When I was logging I tuned every morning minimum.
-
No, a carb cant compensate for temperature, fuel, etc. If you run an adjustable carb saw and want it to run right it has to be tuned...
-
If you want the saw to perform as designed you have to tune the carb. Get the Mtronic IMO.
-
Not much on my saws but I found this quote " A 2019 study by the U.S. Forest Service found that improperly tuned carburetors account...
-
When it needs it yes but not just the fun of playing with thee L/H screws. As above when the saw is running nicely why play with it.
-
Many later factory saws came w non-adjustable H jets. That has to mean something. I have personally found that saws with larger...
-
Third Eye Grip on the top?
-
Bought those two:
