ZERO's latest activity
-
It’s a Single D screwdriver you need for the carb. -
Muffler mod will wake it right up. The difference is amazing. I wouldn’t advance the timing they don’t need it. The 3/8 is horrible on...
-
Lp is jumpy
-
@Crocky28 ?
-
Then this carb is different than US models. As far as the chain goes, they sell the saw with .325 nano or 3/8 LP.
-
There is no limiter caps on this. I need some round splined tool to tune. Idk. Whatever chain it came with. Echos own chain? Or oregon...
-
Also, what chain are you running?
-
The red needle limiters have a slot in for a flat screwdriver, but that will give you only 1/4 turn of adjustment. Use a thin drywall...
-
Muffler mod and a slight timing advance help quite a bit.
-
I like this echo but its really not suited to timber this size. However, its running very rich. I dont have a tuning tool for it...
-
That reminds me of a trip one of sons and I took to the mega-lumberyard years ago. We were nearing the end of shopping when he said he...
-
I agree, many are those fleeing California that want their own piece of the mountain, but don't want to mess up their manicure too. I...
-
Those are the folks that should not own a saw. The 170/180 has it's place but is nothing like a 024/026. I am not really sure what the...
-
They need to shed their dresses for any real pricing. We need a picture of that 034 with its top cover off. Same with the 024. I’d...
-
