ZERO's latest activity
-
Which is it @Jusgunn3 ? -
That would explain why I was having a heckuva time getting a double bevel to match up. lol
-
I never seen RSK as factory square ground, only round.
-
This is my first RSK and it's square ground originally. Maybe. I was having to hold the file flatter to get the bevel that contacts...
-
Not sure that I've done RSK, but been doing some Carlton and Oregon recently from round using the Vallorbe chisel (2270) and triangle...
-
Vallorbe works, you square filing RSK from original round configuration ?
-
Thicker on the file surface that contacts the side plate?
-
I would definitely stick with a brand that was thicker than Pferd, if such a thing exist.
-
I can take some more measurements if it's useful for any of the double bevel or triangle files I've got (Pferd chisel & triangle...
-
I felled and bucked a 50 ft 36" standing dead alder and dropped, bucked a 60 ft 18" sycamore limb. Stayed out of the dirt. Maybe 2...
-
I only cut up about have a small oak and stayed out of the ground luckily. I am curious how it is to sharpen.
-
I finally got around to cutting with those loops you sent me. It is excellent chain. When I got done the corners were visually dulled...
-
ZERO reacted to Duane(Pa)'s post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with
Like.
I’m getting old and repeating myself 😳 -
ZERO reacted to Duane(Pa)'s post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
The stone arbor holds the stone to the motor shaft. It can be moved up and down vertically after loosening a set screw. I’m not sure...
-
ZERO reacted to Khntr85's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
You mean the motor itself