ZERO's latest activity
-
ZERO reacted to SawAddictedFarmer's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
I actually have the saw at our place right now so I'll check that. -
ZERO reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Should be regular nuts also I’m betting, Stihl wouldn’t rely on a plastic air filter housing to effectively hold pressure on the carb to...
-
ZERO reacted to SawAddictedFarmer's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
The one I rebuilt just had two big fancy nuts on the air filter that also held the carb down.
-
ZERO reacted to Chris H's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
I should have mentioned this is the T&S square grinder that I bought.
-
ZERO reacted to Chris H's post in the thread Simington / Silvey Square Chain Grinders Tips/Tricks/Secrets with Like.
I just bought this grinder and got it last week. I have wanted a square grinder for almost 40 years. I had always wanted a silvey or...
-
Well, I finally got a loop spun up and through it on my MMWS 261/262xp and I love it! It’s fast and really cut well, I will be spinning...
-
Many people think only of ScotchBrite dishwashing pads. But 3M (and competitors) make abrasive pads, wheels, etc., in a wide range of...
-
Tell me more about the Scotchbrite abrasive wheel and how you use it please.
-
I prefer to restore the depth gauges to factory profile, to minimize the risk of a sharp corner catching. Use a flat file, Dremel, or...
-
Flat but angled. Lower in the front. The lower you go the steeper the angle.
-
So, I suppose you end up with a flat top raker? If that works, then we are sorta answering the question.
-
They are an excellent gauge. If you don't have a good memory best keep the little diagramed card handy that shows which slot is what...
-
Get a progressive raker gauge. The WCS is the best I’ve seen. It gives you depth options. A simple jig that sets the raker for the...
-
I have never been able to tell any difference from behind the saw. My smoothest cutting chains are the ones with the most consistent...
-
Someone make me a good offer on this thing I need to move some saws to make room for others