ZERO's latest activity
-
I really do not know how to take that post.................. :facepalm: -
Came home from AM work shift, got into an argument with my mom and went into my shop reducing old-school solid wood furniture into...
-
No, the 620s have an offset pin so there’s no way to do that. The 7310’s have an enclosed pin so there’s is no up on the rings.
-
Top ring put on up side down?
-
I didn’t measure, but it wasn’t too bad. The worst cases I have seen are concrete saws (where the skirt can wear through) and a pair of...
-
Out of curiousity, whats the piston to cylinder clearance? That slug looks aweful worn, as i dont see any mavhining marks left on it...
-
There are no springs on modern adjustment needles. There is a plastic insert either in the carb body or in the screw to act as a lock.
-
Don't forget the little washers and O-rings whilst you're in there. If there aren't any, I personally recommend getting some. Might...
-
If you have trouble with the jets backing off it is because the springs have got weak. Just gently stretch the spring a tad and that...
-
Makes me question how many get bent just trying to get the limiter caps out.
-
Thanks for these last tips. I won't dumpster dive; I'll put a piece of tubing around the tuning screwdriver. Great idea.
-
That gets to the only thing that I ever said nice about the splined screws. Easier to keep the tool on one. Just don't get careless and...
-
Use Mike gott. You could have has him bring them to the gtg.
-
Order summary $59.99 $58.06 Tsumura Lightweight Guide Bar, FK Series - D025 Style - 3/8" Pitch / .050" Gauge (D025 - Stihl Large...
-
That was somewhat my point as my posts centered around my purchases of Stihl products purchased from Saw Supplier, hard to buy a Stihl...
