ZERO's latest activity
-
There are no springs on modern adjustment needles. There is a plastic insert either in the carb body or in the screw to act as a lock. -
Don't forget the little washers and O-rings whilst you're in there. If there aren't any, I personally recommend getting some. Might...
-
If you have trouble with the jets backing off it is because the springs have got weak. Just gently stretch the spring a tad and that...
-
Makes me question how many get bent just trying to get the limiter caps out.
-
Thanks for these last tips. I won't dumpster dive; I'll put a piece of tubing around the tuning screwdriver. Great idea.
-
That gets to the only thing that I ever said nice about the splined screws. Easier to keep the tool on one. Just don't get careless and...
-
Use Mike gott. You could have has him bring them to the gtg.
-
Order summary $59.99 $58.06 Tsumura Lightweight Guide Bar, FK Series - D025 Style - 3/8" Pitch / .050" Gauge (D025 - Stihl Large...
-
That was somewhat my point as my posts centered around my purchases of Stihl products purchased from Saw Supplier, hard to buy a Stihl...
-
Did that, but, this is Marine Tex which seems to flow a little better with heat than JB. I also didn’t really care how it looked…the...
-
If you have a heat gun or hair blow dryer with a low setting and hit your jbweld just after pouring it in you can get the bubbles to...
-
+ scary
-
ZERO reacted to singinwoodwackr's post in the thread 661 muffler mod progression w/thermocouple with
Like.
WHAT? -
They will, but they're annoyingly loud and obnoxious.
-
Wait. I thought saws wouldn’t idle if the muffler opening was too big🙄👍🏼