ZERO's latest activity
-
I think this is the first time I ever saw 2 broken clutch shoe retainers (311 model). The clutch drum had come partway off or loose, not... -
I worked on a Stihl trimmer (fs45 or similar) that had done the same thing of bending the rod, although I don’t think that had any...
-
I do understand how the ez start is supposed to be operated, and I have explained and demonstrated it to the owner as well. The saw...
-
ZERO reacted to WI_Hedgehog's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Are you pulling it over slowly? If you pull it over like a normal saw it does that. It's supposed to be wound up slowly until it... -
ZERO reacted to Gary Courtney's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
-
ZERO reacted to Gary Courtney's post in the thread STIHL The Official Stihl Chainsaws Thread with Like.
Just finished rebuilding a 500i given to me. Replaced seals,bearings,piston and rings,primer bulb. Cylinder was good with a little...
-
The service manual for the 33, 35, 39 is where I saw that there was a 33, 33A and 33AA. Probably not much difference between them other...
-
As far as I know there were only the models listed above. That particular saw is a 33, the 33B and all of the others had a much longer...
-
ZERO reacted to Gary Courtney's post in the thread SELLING Husqvarna 55 Rancher parts or project with Like.
@Olds120
-
I have another that is not as good and a pile of 4400's along with many other Poulans.
-
This is a fine saw, I have one also and it keeps on running and running... It has surprisingly good power!
-
-
This saw runs great. About 3 tanks through it. The only thing I had to replace was the bar oil tank vent. Will come with the bar and...
-
Bump, $250 + the ride.
-
I wish I had a SP81. Ive tried to get one but everytime I do someone else gets to it before I Can. Do you have experience with the...