ZERO's latest activity
-
LoL maybe 🤔 I’m not laughing at ur comment but how we are all spit-balling this. Have you swapped out the chain yet? That’s were I’d... -
In that case as the rest of the chain stretches the whole thing will be More uniform?
-
My money is on a tight bunch of rivets or sloppy holes on the chain. A bearing, rim sprocket or nose sprocket will not give that much...
-
Both pieces or just the rim?
-
Called a local shop and will be grabbing a Oregon to see if that fixes. I’m going to measure the Chinese one tonight and see how it...
-
YES Both 3/8" but is one a LP/Picco? Pull the (I assume it is) rim and chain and see if th chain sits/saddles in the rim sprocket all...
-
Lots of good advice here. You might also check the chain drivers to make sure there are no burrs.
-
I've seen it with no-name rims. Calipers confirmed out of round between inner spline and outer rim. SMH
-
I had this problem and it was the chinesium sprocket
-
Won’t hurt to take it all off and blast some brake clean through the rim.
-
I’ll toss a well used loop on this evening and see what happens. From what I’m seeing it could be uneven stretching of the chain which...
-
Bearing was in perfect shape when I disassembled. Saw was barely used. Just filthy
-
@STOVE Saw boogers jammed into the sprocket can have this effect.
-
Try a different chain on the saw. I had this happen and it was the chain.
-
Yes , both 3/8
