ZERO's latest activity
-
Won’t hurt to take it all off and blast some brake clean through the rim. -
I’ll toss a well used loop on this evening and see what happens. From what I’m seeing it could be uneven stretching of the chain which...
-
Bearing was in perfect shape when I disassembled. Saw was barely used. Just filthy
-
@STOVE Saw boogers jammed into the sprocket can have this effect.
-
Try a different chain on the saw. I had this happen and it was the chain.
-
Yes , both 3/8
-
Tight links.
-
Check sprocket.
-
Get the chain rolled around to either a loose or tight spot. Make a sharpie mark on one spot of the rim/sprocket. Also make a mark on...
-
ZERO reacted to brushwacker's post in the thread HELP! Homelite DM 50 interchange with the 550 ? with
Like.
Still looking for this part. -
ZERO reacted to brushwacker's post in the thread HELP! Homelite DM 50 interchange with the 550 ? with Like.
I was asked to fix the starter on DM 50. Looks like it would be best to replace àll the starter cover - recoil assy. Pics on eBay the...
-
Same customer, different saw (620 instead of 7310). This is the 3rd time this saw has had this exact failure, which I blame on...
-
The end gap is .017. Echo specs, as I said, are .004-.006. I measured the side clearance again and found it varies substantially, from...
-
I agree. I was was confused with the term side gap... Most just measure end gap and to me .005 seems tight for that bore size with a...
-
When are the 661c’s being posted? Hopefully you have some!