ZERO's latest activity
-
Who makes this 3/8LP .050? I am looking to buy a 100' roll if I can find reasonable. My vendor only appears to sale in cut loops which I... -
Looks easy enough to do and will be very helpful, thanks!!
-
Was off to see me Nan the other when some bird in a lorry asked me to nip up her jubilee,....sure I says... Finish up and go to put me...
-
Yeah, it got pretty hot on just a test run. Once I knew it got warm, I turned it off. If I need to use it before I get a front element...
-
I have a 271 going to Polish, advanced timing and custom wrap handle .
-
I wouldn't use the G with only the rear element working, it's the front handle that requires watts from the generator. If you use only...
-
On Husqvarna there is around 4 ohm resistance in the front handle, it has been on the 1xx - 5xx series, but the 5xx has a nicer heating...
-
The front handle was replaced with a non-heating element handle (standard handle). I have the wires connected back up to get the rear...
-
ZERO reacted to ManiacalMark's post in the thread HELP! Ms460 Arctic parts robbed off saw with
Like.
Which wiring do you need? I think I have all of it -
Yeah, I have seen that, I think @Tor R detailed the process on Huskys in an older post. It doesn't get that cold here and I have other...
-
Heck 1/2 is better than nothing....😀 It is possible to make your loop handle heated. It is not easy, not pretty and definitely not...
-
Couple days ago I had a knock on the door ,guy I used to work with who two months ago dropped off a Poulan pole saw I had it a day or...
-
15 Jan the latest I've ever been to light the fire .Nice and toasty let it snow .This year I didn't do so well with the fire wood had a...
-
Yeah I was comparing them it is smaller on the bar nut side so would maybe look ok if I painted behind the decal black first. I imagine...
-
Looks like the 2255 clutch cover decal is close - maybe with some minor trimming it could be made roughly the same shape: