ZERO's latest activity
-
Today I installed my last two parts for a Husky 365 that I bought from @redneckhillbilly (great guy to buy from!!). This was a fun... -
Parts for this cream sickle showed up so got the bottom end together and started putting it back together
-
With the new assembly the throttle opened fully. Not that it was a big amount in the first place…It hit 14,3 briefly after playing with...
-
With your new throttle assembly, are you getting full speed? I've seen new ones that didn't make it...
-
If Meteor 242 piston is used it becomes a low compression turtle, with the same intake timing as the old 42 had. On Gilardoni 241 C or...
-
I replaced the throttle assembly with a nos after noticing the thing was not quite getting to full throttle. Got a few hundred more rpms...
-
Well...a KS piston with 2811 showing on the inside skirt via scope. Hmm...
-
Steve has pointed out that his 242 has the same limitation. Cause: AM Meteor piston. The cyl is a new Gilardone but I haven't checked...
-
In theory, you could make a base piece that had a cutter mounted. You can definitely modify the cutter for other chamber contours. If...
-
I did not make the squish cutter it is from dyno joe. The rings are interchangeable and can change what size cylinder you want to cut...
-
Yup, I have worked on many saws that looked like that, need to be an archeologist to dig the saw out of the dirt encasing it. Smart man!!
-
More photos of filth
-
A friend of mine texted me a photo of a ms290 he found cleaning out his parents house after they passed. I was gracious to have any saw...
-
nice finish. Does the outlet port not hit the brake when it's pushed down? I do mine similar but more to the front not at this time...
-
Husqvarna 572XP
