ZERO's latest activity
-
I can take a pic of that. I noticed it helped when doing 350/346 builds. Not sure if it is really needed with the 350 cylinder. -
That is the approach I’m going to take. No machine work on this one, but I’m doing to work the transfers a bit and widen the exhaust...
-
I happened to compare a 350 to a 353-cylinder one time and what I noticed most was the upper transfers were much smaller in the 350...
-
Did you by any chance, take pics of what you did on the transfer dividers? I've got a couple 353 cylinders id like to experiment with.
-
The OEM 45mm cylinder is in good shape, and I have a meteor 353 piston, so I’m going to use that combo.
-
What are you putting on that for a cylinder Greg?
-
Holy crap! That was crazy
-
Also this is where my motor came from lol I went to highschool with this kid and bought this to part out and I put in my sled
-
Damn lol
-
My sled used to have a triple in it and the twin hit the steering so my cousin welded a 45 degree piece to 1 carburetor and it sat in...
-
That 700 motor sold me on dominator ran that motor for probably 20 miles with no oil pump or water pump. Launching flames out of the...
-
My wife got me a mess of sled carcasses for my birthday, with a ton of parts and two good engines. None of the sleds are actually 600ho...
-
Husky 350 rebuild. Tore it all the way down to re-seal the bottom end. The cylinder riser was warped…I don’t think I have ever found...
-
What's wrong with the skidonts? I had a 700 that I put in a Polaris chassis once and never hooked oil to the bottom end... It didn't...
-
Lol
