ZERO's latest activity
-
When did this forum get more trolls than Denmark. Your engine was probably exposed to old gas that you don't have the self respect to... -
Just making sure you realize that NGK heat ranges are backwards from most other manufacturers; the higher a number the cooler the tip...
-
Now you have me thinking. Im wondering it if it will build up in the carb screen and diaphragm.....:rolleyes: I need to tear a fine...
-
Ya Ive read and heard that all over. I did find that it darkened and slowed the fuel through the white filters. I have not seen any...
-
Adding a zinc based additive is not a good idea at all.
-
-
50 below F So stoking the boiler and staying warm Took care of a big pile of paperwork today
-
Came in the mail today! Very excited to cut with it - maybe tomorrow?
-
Threads by @Onan18
-
Two Rotax 600HO twins
-
I’ll try that. Today I re-tested p&c while cycling the piston and spraying soapy water all over… nada leaks. I moved on to assembling an...
-
Check to see if the throttle and choke butterfly screws are tight. Also check for slop in the throttle shaft.
-
I pulled the muffler on the 034,, still has machine marks on the slug. I massaged the muller a little. fuel line on order.
-
ZERO reacted to 16TAF's post in the thread 2025 Christmas Giveaway Saw MS390 - Boedy @ Empire Builders (Closed) with
Like.
Not working for anyone. I don’t post much. It just so happens to couple threads I’ve read on here he got brought up. I watched his... -
ZERO reacted to MG2186's post in the thread 2025 Christmas Giveaway Saw MS390 - Boedy @ Empire Builders (Closed) with Like.
What’s Boedy excuse, he’s not good at either!