ZERO's latest activity
-
Exploding a clutch in the shop is a rite of passage. That moment when you realize you still have both eye's is priceless. Also you... -
I hand tighten There are a few ways to get things tight, but the saw, in theory will tighten the clutch down as it’s turning in the...
-
Some people have no sense of adventure!
-
Well, you're no fun...
-
Unless you are using a multi-speed/torque, 1/4" impact that you can dial down as needed, just use a piece of pull rope in the plug hole...
-
Don't forget to put the clutch cover back on when testing the saw, don't want a clutch to come loose and spin off of the saw at great...
-
Torque to spec if possible. Have had a few things come loose ‘impact tight’. Don’t reinstall with starter recoil installed
-
I use an impact to reinstall them. I used to use a piston lock and ratchet but I found the impact to be more reliable. Just make sure...
-
Hand tight works just put it in a log for a second right after starting. Or do it with the impact. Either way works.
-
Hello all used a inpact to remove the clutch from my saw and now im ready to reinstall it. Do I burb it back on with the impact or go...
-
ZERO reacted to HumBurner's post in the thread SELLING NIB550xp MKII w/ 20" bar and 33SPG chain with
Like.
-
ZERO reacted to HumBurner's post in the thread SELLING NIB550xp MKII w/ 20" bar and 33SPG chain with Like.
Up for sale is a new, never fueled 550xp MKII with 20", .325/.050" bar and SP33G chain. Price is $650 shipped/insured to the 48 states...
-
50-60cc seems like the sweet spot. I like my 261s but the 2065 takes a beating an asks for more.
-
Ported 400c gets it done. Crazy good power to weight. Kinda the perfect saw for firewood up to 2' dia. But a well ported 562xp is right...
-
Gas stations & supermarkets have some little black pills for that! Just saying.