ZERO's latest activity
-
ZERO reacted to Sloughfoot's post in the thread Preparing to port first saw - which one, and what method? with
Like.
How's it compare to your Mastermind 044? -
ZERO reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with Like.
I think it should bring some more torque in the cut. Any thoughts @Stump Shot @huskihl ?
-
ZERO reacted to Sloughfoot's post in the thread Preparing to port first saw - which one, and what method? with Like.
What's the tradeoff with lower blowdown? Peaky torque curve?
-
ZERO reacted to jacktheripper's post in the thread Preparing to port first saw - which one, and what method? with Like.
Here’s what I did: Here’s the video: 272xp mod #2 Seems to have shaved 2.5 seconds off. I am contemplating raising the uppers more...
-
ZERO reacted to huskihl's post in the thread Preparing to port first saw - which one, and what method? with Like.
Run it without the air filter and see if it gets better. It could be plugged up, but I doubt it’s the actual air filter design. Only one...
-
ZERO reacted to MemphisMechanic's post in the thread Preparing to port first saw - which one, and what method? with Like.
let is know how it turned out, once you run it! I second this reocmmendation. I have redbeard’s foam filter & velocity stack on my...
-
Blue mix is best mix.
-
That looks like the stuff Stihl sells under their name in Canada. Not a bad price.
-
Yes it is, fd rated, blue and $40 per gallon. I just needed it
-
Is it blue?
-
It's fd rated so it can't be that bad. I don't know why but I think they make vp oil. Or both made by the same parent company?
-
Any one try this one yet? Got a gallon on the way ‘cause umm… oil addition reasons.
-
If it went pig rich when you got the tank to vent you tuned around a clogged vent. Fix the vent. Then fix the tune... 1.Turn the low...
-
Pulled the clutch off, started the saw, sprayed brake cleaner around the seal, absolutely no change in rpm. It's probably an issue with...
-
To find air leaks, you can use some kind of flammable cleaner or ether with a straw to check for leaks by spraying it on the suspected...