ZERO's latest activity
-
I’ve seen worse cylinders. Run some sandpaper over it and seem how much is aluminum transfer that comes off. -
Congrats!!
-
Okay, cylinder and piston are out. I think the cylinder is f'd but I defer to the experts. It's a 45 with the dish top. This thing...
-
Update the intake boot clamp to metal if it does not already have.
-
but they did not get 1000 hours out of a saw with one horsepower per kilogram or better.
-
No mosquito bites, at least.
-
ZERO reacted to hero_n6600's post in the thread Accelerator Pump O-Rings (Carburetor Model Look-Up) with
Like.
Ok, finally has my FS52 Walbro WT carburettor's piston pump oring's part number which is 1120 122 3600, ordered that from Stihl dealer... -
ZERO reacted to hero_n6600's post in the thread Accelerator Pump O-Rings (Carburetor Model Look-Up) with Like.
Hi, EFSM, 1120 122 3600 is for WT112 Also looking for old BR700 piston pump o-ring size, it uses zama C1Q-S183 carb
-
ZERO reacted to EFSM's post in the thread Accelerator Pump O-Rings (Carburetor Model Look-Up) with Like.
it would be easier to tell you what size you need from the model of carburetor or model of equipment that you’re working on.
-
Thanks for the info. sir.
-
I have one. Typical Cannon quality, which is to say very high. Price is also very high and they are not as light as some light bars.
-
Bad seals or bearings?
-
Got a 562xp MK1 that has super low compression. Scored on the exhaust side, have to get the carb off to see the intake side.
-
"...We're gonna need a bigger bench..."
-
On the bench today? A 1971 Allis Chalmers HD 11E. Been sitting for about 20 years; was on the property when the guy bought it and he...