ZERO's latest activity
-
-
The loctite on the threads can indeed make the clutch hub hard to remove. The clutch tool and a long breaker bar is the best way to do...
-
Ha you just beat me to it :)
-
Better to get one with the oval pins set radially positioned. They are a little easier to fit between the weights...
-
The one I...
-
https://www.amazon.com/Genuine-89750516133-chainsaw-removal-CS-4000/dp/B07CF4MKF4
-
ZERO reacted to Welderman85's post in the thread Clutch tool for Z clone saws 58cc - 62cc with
Like.
Sorry i dont have a picture from my saw but they all use the same clutch. There's a Pic I found that is the same thank you -
Warhawk cylinder going to try porting it squish .021 no gasket. Doesn't look terrible machine it up and see what it looks like hopefully...
-
Well his job went South so we rescheduled for Friday. Instead we butchered the huge 8 point buck we found at the end of our driveway...
-
Well I mixed up 2 gallons of 32:1 and if my boss finishes a job in time were going to go play around with some Ash of his. I'll get...
-
We butchered a huge 8 point buck we found at the end of our driveway! One back quarter was mashed but the rest was good. Whoever it was...
-
Almost new 2024 Husqvarna K770 concrete saw (2024 model). The pulse line looks like it split when it was installed at the factory. The...
-
-
ZERO reacted to singinwoodwackr's post in the thread Your pick of light weight bars for Husky? with Like.
This is great. Thanks! I have some long bars I can add once I get them weighed. Cannon Superbar, old style, 50” Husky mount Stihl 14mm...
-
https://opeforum.com/threads/oregon-bar-weights.22919/ https://pbase.com/wyk/unofficial_chainsaw_bar_weight_gallery