ZERO's latest activity
-
Just curious as to why you believe ultra is overpriced low quality and what mix oil do you run in your saws? -
Just about any aircooled oil is better snd cheaper than Ultra. You want to waste money on low quality, yet high priced crap, have at it.
-
A properly tuned saw burns oil just fine or you would have a mess in your muffler and even worse internally. A 20 degree swing in...
-
🤔… I’ve been using the Stihl ultra for over 25 years now. Buck over 100/face per years plus treework. Everything runs well and engine is...
-
Motox mix may be 99.99% alkylate, but others are not. Its mixed with Ultra oil, which is garbage so its not the finest. I am well aware...
-
Has more to do with the tune and the individual oil. If you’re making carbon and you didn’t like it, switch to something else. The pics...
-
The canned fuel like motomix is 99.99% alkylate fuel - it’s simply the finest fuel you can run and has a shelf life of 2years. Iirc...
-
Agreed. Where I used to cut the most is 2400ft higher than my house. A little tickle on the screwdriver mattered. The oil ratio not...
-
Your energy figures must not be including the energy present in the oil, which has a higher BTU number than gasoline.
-
This is spot on and a reason why Autotune and Mtronic are very beneficial to the average guy.
-
We dont add aromatics to pump gas...we take them out in fact. Some of the cand fuel actually has aromatics. Benzene, Toluene and Xylene...
-
I think that at the end of the day, tuning needs to be about what the saw is doing in the moment. Whether its affected by altitude, oil...
-
32 vs 50 to 1, is a 1 percent difference in fuel energy. 50 vs 100 to 1, is a 1 percent difference in fuel energy. e10 is 3 percent...
-
If you’re tuned rich on the h,l circuits it’ll burn dirty whether you are at 50:1 or 32;1! A gallon at 50:1 is 130.6 oz total , at 32:1...
-
There isnt much to elaborate on. If you're tuned rich you will burn dirty. Also using a high viscosity, high temp oil doesn't help either.
