ZERO's latest activity
-
In a box on the floor of my local dealer. I’m gonna give the timber savage ones a try next order from traverse creek -
You have to admit, there’s not much metal to remove on 1/4” chain. Not being critical, I love 1/4, wish I could find full chisel. All...
-
Looks like a discontinued Oregon item. . https://www.partswarehouse.com/Oregon-Chain-Reel-Kit-p/ORC-104713.htm
-
Got packet of links for chain repair . Several different number but you can tell they come from the supplier . One number is 104713 on...
-
ZERO reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with
Like.
Should hang with it. -
ZERO reacted to SawAddictedFarmer's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Randy, the saw runs like it's mad at the wood. It seemed to laugh at a 25in bar in half dry pin oak. Full comp EXL with rakers at .030...
-
ZERO reacted to hacskaroly's post in the thread Looking at upgrading and would welcome advice/opinions. with Like.
You can use either yellow or green chain, they will both cut your leg off if you give it a chance....some people don't like the green...
-
Just finished up this 350 with an OE 353 top end thanks to @Mastermind. Deleted the base gasket and opened up the muffler. First cuts...
-
Thanks man. It’s a lot of work on the weekends to keep things in check. As you probably know, things can pile up
-
Tidy looking workspace. I'm jealous.
-
Finally wrapping up some things But there is plenty more to work on 😄
-
2175xpwxs
-
Looks like a low-profile variant now amigo, that sucks. Is that the 2165?
-
ZERO reacted to SawAddictedFarmer's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
Can anybody confirm or deny will the oiler out of a 500i, or 661 fit in a 462? They look the same on the internet...
-
ZERO reacted to Duane(Pa)'s post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
Subbing to this.