ZERO's latest activity
-
have these been shipped out? not in a rush, just realized today that I hadn't seen anything yet. -
Saw fired right up again this morning. I'm chalking this up to condensation in the tank. I should have refueled when I quit, That way...
-
I carry a shoelace in my saw toolbox to tie down the trigger at WOT, easy and fast enough to take it of once the engine starts to...
-
Zip tie that throttle wide open (very dangerous) unless you can man handle it and yank while holding trigger. Probably smoke show until...
-
Some pulls with fast idle engaged might get you going. If not, set the bar tip on some wood, hold the throttle wfo with your right...
-
The/my PS-6400/7300/7310/7900 are notorious for doing this. Once they pull fumes into the carb they won't start due to fuel starvation...
-
Uhh Ported saws, I think yah all got bad asś cad I’ve got a few saws as well 🤦♂️
-
To me his saws sound over ported. Probaly work ok in his area as he cuts alot of redwood, which is extremely soft. There are several...
-
ZERO reacted to mainer_in_ak's post in the thread HELP! Help with first time porting Echo 800P with
Like.
True that! The going rate for a used 8000 or 800 is $400. I guess some of the ebay sellers didnt get the memo though. Whats surprising... -
So back to the saw. For a timing advance how much do you take off the side of the key and which side? Muffler mod, can I just cut the...
-
As soon as I get this round of stuff finished we have to get our case 1070 in the shop and split it... Hopefully we don't have to tear...
-
It's not that so much that as I just don't have time to do it twice. It's a very good friend that doesn't care what I do so long as it...
-
If you cannot afford replacement of parts you ruin, I would leave it alone!
-
Maybe just a timing advance, muffler mod and match the intake to the manifold? I can't afford to screw anything up...
-
Ah ok. Very helpful!!! What could possibly go wrong...? My saws go to Randy.