ZERO's latest activity
-
ZERO reacted to jakethesnake's post in the thread Recent Wood Score Post your Pics Thread with
Like.
Yeah really good stuff. Better than cherry. I cut a lot of cherry. Heavy even after drying -
I was forced to burn my Bradford pear wood after a strong storm blew down the tree, over 30 years old. After drying and splitting the...
-
ZERO reacted to CrystalRiver1's post in the thread 18" Chain .325 .063 74 DL Full Chisel SKIP? with Like.
Hey Studs, I was browsing through some .325 chain for my MS 261cm and stumbled across this. Is this a more potent or better chain for...
-
Take donuts
-
BTW it appears to me the 7310 scavenger poorly based on design. IE its a delayed scavenging scheme.
-
Yea, its not strato in the sense that Husky employs. The 500I just sprays fuel into the crankcase. Any stratification that takes place...
-
Acquired today from a friend that was north of our border.
-
Yes sir. The cs 8000 got the HDA 45 carb and the cs 680 style cartridge filter. Had to open it up the plastic intake so that the hda 45...
-
Have you ever tried bigger carbs on any of them?
-
I just saved this cs400 from the dumpster. Decent little 40cc saw , I removed the Cat from the muffler and replaced all the fuel...
-
Next up will be a cs 6700 type 1e and a cs 670. All the parts came in. Fresh seals, koyo 6202 bearings, rings and all rubber parts...
-
No sir, was new outta the box. My last 4910 was stock and wasn't a strong saw. Trying to get the silly thing to hang with a cs 520 or cs...
-
Goes something like that every time I work on a saw. That's some strong numbers. Know what it was doing before?
-
Echo cs 4910 Had 1 hr. epileptic seizure with a burr grinder. Sealed the cylinder down with hylomar blue. Got that hylomar sht in my...
-
Tig weldded up the head I cut off last night. When I faced and turned it to cut the chamber and seal area, full of porosity. Have done a...