ZERO's latest activity
-
I assume this is the modern version of mediacat? -
I appreciate everyone posting about this. If you know anyone who has had this problem, let them know about this thread too.
-
I've not used mine for a while, but I probably have the same problem. The link that I used to download the software stopped working.
-
I tend to try and make something from nothing frequently. If the crank feels good, slap something together and see what happens
-
I didn't notice that when it was in my hand, but I did see it when I reviewed the pictures. I will definitely look at it closer. If both...
-
I think the damage around this port, with the cracking in the plating would be my biggest concern. I believe that is one of the strato...
-
I picked up a pile of "junk" saws the other day that I am sorting through to see what is repairable, and what is parts. One of them is a...
-
ZERO reacted to lehman live edge slab's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Well John brought me his first blown 500i the other day, kinda odd was the newest all stock one without even a muffler mod. I have a low... -
I checked it with my tach today, and she is doing around 3000 at idle and 12600 WOT. So, I guess I am in good shape. The 194 manual says...
-
The exact idle speed is not that important. According to manufacturers, the most common tolerance for its setting is ±200 rpm, which...
-
I have also found that when the chain is too tight it can stall the saw when you release the trigger. It's as if the extra tension can...
-
Thanks. According to my manual, it gives the idle speed after factory carburetor adjustment of the hi/lo screws as 3000 rpm but it...
-
An overheated clutch spring causes the clutch to engage earlier
-
Officially, the idle speed for MS 194 is 3000 rpm. I think it is unlikely that enriching the idle mixture with the L screw helps in...
-
Matter of fact, I encountered this very problem on my new to me MS-194C yesterday. It would die out after a long cut. I richened the low...