ZERO's latest activity
-
Yes, they worked for me, too good in fact. I squeezed mine too tight and couldn't get the chain in the groove; had to use a chisel to... -
If you do catch it on fire snuff it out with the argon from your torch... don't try to blow it out like I usually try first!
-
Well, maybe its a good thing I got 1/8" filler rod, 🤣 . That would be exciting to have a magnesium rod burning out of control.
-
No need to tear it all the way down for that area, it's far away from any gaskets and seals that could be damaged from heat. Leave the...
-
Tell them to buy AstroTurf.
-
Works good. It does seem to like a little more fuel in the high and I can actually tune it now. Is there a way to post a video here...
-
Thats exactly what I did. With a punch and a hammer, peened the edge in a bit from the inside, then put a new welch plug in. On the...
-
I may be wrong, but it seems to me that it would be enough to just reduce the idle hole. But now it's too late... 😅
-
Looking forward to hearing how it goes!!
-
I took a punch and folded the idle hole half shut and the same with the first transition hole. Beat a new plug in there and set the...
-
The needle should be before the plug. And, of course, the entire volume of fuel remaining after WOT behind the L needle will count if it...
-
Im liking this discussion. My biggest problem in life is i always need to know why. Another carb might solve the issue, but why? What is...
-
It seems to me somewhere, in the case of the bigger carburetor, excess fuel (in comparison to a stock carb) must remain after the...
-
Honestly I’d try another carb before I went too crazy. You know it is in the carb bc the old one works.
-
I do. The 661 parts I got lucky on and got everything but the boot and some av parts new take offs. I let the 261s sit until the cheap...
