ZERO's latest activity
-
I think Dave has a local welder lined up to do the weld but he said it's the first time he's ever welded an oily chainsaw. Are there... -
And you are the man to do it! You fixed my 592 and thanks again!
-
Thx, I'll get started tearing the saw down. I'm assuming the case will need split and everything removed to weld it. Will the bar...
-
Similar problem here. Bought pile of parts and there was 357XPG carcass with both case halves cracked. Flywheel side is easy one, but...
-
Yes, that can be welded.
-
I purchased a 493 last fall, used it most of the winter, great saw, runs fantastic. I mostly purchased this cheap saw for carrying in my...
-
The same saw is also sold by Yamabiko as Echo CS-4920 - a 50.2 cc stratocharged, clamshell design.
-
ZERO reacted to Mastermind's post in the thread Raising The Uppers With The CC Speciality 182 AMC with
Like.
I talk to a lot of guys that tell me how they have trouble with the right angle handpiece jumping and chattering in the corner when they... -
I used to use a small diameter 1/4 drive deep socket with an extension but these work better than anything else I tried. I was just too...
-
Stihl makes a tool for this. I found a cheap nut driver and ground the head off works great and has a safe handle.
-
Simple things like this work best 😎👍
-
https://www.facebook.com/tarylfixesall/videos/stihl-hand-brake-spring-installation-tip/240419577081323/
-
I would say that it's easy to do it with a chisel or a file, but it probably doesn't cost a fortune 😉👍
-
A video might help diagnose it as well
-
Thats what I thought. And these are all good points. I have already checked all these things. Ive ran into carb issues before but not...