ZERO's latest activity
-
I've been looking into McCulloch two man saws... 1225 1948-1948 7.9 In3 5-49 1949-1951 7.9 In3 7-55 1951-1953 9.8 In3 99 1954-1963 9.8... -
Knowing Dallas, it is 100% OEM parts
-
Re-built with OEM parts or aftermarket?
-
Bar is a regular Tsumara, not a Tsumara Light: Chains: Everything fits perfectly in the box, so there will be no extra shipping...
-
Here's when it was out of the box last year for inspection:
-
I ended up with an extra 550xpg that I doubt I'll ever get around to using. Bone-stock, never fueled, sitting in the box for over a year...
-
The solenoids are replaceable, if I remember correctly they cost around $40. If that is the only issue, it is a relatively cheap and...
-
Right. No. The new carburetor has an updated inlet lever spring to improve the idling characteristic. Therefore the fuel flow is...
-
The new coil requires a new carb. Cost is around $340 for the set up.... I guess the new updated coil cant communicate correctly with...
-
Hopefully this Friday. I've been out of town for a few weeks. I'll attempt to get the connectors cleaner and look for any...
-
https://opeforum.com/threads/a-dummy-and-the-stihl-ms441c.25651/ I bought the saw from Jack. Got it running. Got it ported. Lost a...
-
Fellas, this is an old thread. Would be interested in what it took to finally fix it.
-
This is from using the MDG1 Diagnostic tester Procedure. If there is a failure to connect then the wiring harness needs to be checked...
-
Here is a pic of the solenoid.
-
ZERO reacted to David Young's post in the thread Chainsaw selection & Setup for an old fart with
Like.
you got me with the title. I'll have to watch it. I went through this with my dad and learned a few things. Thanks for sharing Mr Logan.