ZERO's latest activity
-
She's bad to skip baths. Why do you go to the flywheel side with the best color degree wheel? -
What a smelly saw. The start/stop lever is the wrong color and your fins are on sideways. You must be on the weak crank. At least...
-
After failing lesson 1 of @Mastermind school of saw dentistry with unneccesary lower transfer whittling , feel like I'm hitting all the...
-
Ok, here’s another. MOFO 034 Super vs my self-ported 266xp without any machine work. Same bar and chain and same wood.
-
That list didn't include the 046 or the plethora of Wildthings that were there too!! :D
-
I'm going to the wrong damn landfill...
-
I probably have some parts for you if you get me a list or maybe you can have the whole box
-
Got a family picture of the all of the Husqvarna's I have: Front to back: * 136 (dump find) * 440 (well used store loaner saw) * 55...
-
I found a Husky 136 at the dump missing the clutch cover, recoil and has a scored piston and possibly some scoring on the cylinder, but...
-
Gents, I have 'opportunity' to take possesion of a somewhat whooped on 543xp. It's rough and not making much air. Ex side of piston...
-
If you look through the 10-10 IPLs you may be able to narrow down the change over. I tried to fit a low filter on my saw and I don't...
-
Close to pulling the trigger on a 10-10. Is there any way to know if one of these takes the hens teeth domed filter or the "low filter"...
-
I'll shot you a p.m ... Ernie
-
McCulloch PN is 87674. I have a few NOS as well as some 3D printed ones that I make (and sell) as well. The 3D printed ones are not...
-
You wouldn't happen to have a part number would you ? Thanks Ernie
