Woodtroll's latest activity
-
WGot my little 2 1/2 lb hatchet handled. A little large for a 12” but the ergonomics are good. The one wedge that came with it wasn't...
-
WUpdate: @buckin-wood - I used your idea here on modifying a 562xp nozzle, and it worked great! I've ran a couple tanks through it now...
-
WI’ll give this a +1. Their oil is even better at conditioning leather if you don’t really need the beeswax to help waterproof your...
-
WI did not remove eyes. Peened right into the existing ones.
-
WFinally got around to putting a set of hooks in my red wings. Fantastic so far. If anyone wants an update ask in a year or so
-
WThe gizmo is a fuel tank vent, to prevent a vacuum forming in the tank when the fuel level drops. The symbols are summer and winter...
-
WWoodtroll replied to the thread Generac Standby Unit and Preventive Maintenance.You're very welcome!
-
WWoodtroll reacted to hotajax's post in the thread Generac Standby Unit and Preventive Maintenance with
Like.
Woodtroll: Thanks a lot. Appreciate your comments. HA -
WWoodtroll reacted to jacob j.'s post in the thread STIHL Clutch Drum Fan Housing Assembly with Like.
There should be a standard bearing can you press in there. You'll need to remove the old bearing and get the measurements on it and then...
-
WWoodtroll replied to the thread Generac Standby Unit and Preventive Maintenance.On the newer ones (last 6-8 years or so at least), yes there is. You just push the "Off" button on the control console. I've installed...
-
WCraigslist ads and people. I asked about a saw by name and model, that was in the picture. Absolutely nothing else mentioned or shown...
-
WYikes steep
-
WI know this is a month old, but I’ve used Obenauf’s beeswax based leather preservative for years and it is really good stuff. It was...
-
WToday's fresh hang - A five pounder tasmanian on a 32" fawns foot. Flat grind with a microbevel. Unsure of the maker, so if anyone has...
