Woodslasher's latest activity
-
After 30+ yrs…got all the hydraulics on my splitter rebuilt :p I think it was due, lol -
Woodslasher reacted to Wilhelm's post in the thread Random pics (that you took) thread... with
Like.
Reminder to everyone not to hoard old unused gadgets with Lithium batteries! By chance I noticed the battery hatch to be popped open on... -
Saw is in decent shape. Has some scratches but overall it’s pretty nice. Saw has been cleaned and is ready to go. Muffler is dented...
-
Saw only has 3 tanks of fuel through it. 40:1 amsoil with non ethanol. Egan filter system Egan muffler. PHO. 900.00 plus shipping...
-
The saw has a new owner.
-
In reality the PM850 and/or SP80/81 mufflers will not actually just bolt up. The PM800 family use a strap on top of the muffler to...
-
Woodslasher reacted to Bill G's post in the thread SELLING New Stihl 661 Arctic heated 1/2 wrap handle. with Like.
I had a good supply of new Stihl 661 Arctic saws with 3/4 wrap handles. I had several folks say they wanted 1/2 wrap handles for them...
-
Woodslasher reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics or drama with Like.
Morena E Hoas.
-
Woodslasher reacted to Rallyeguy's post in the thread MCCULLOCH The official McCulloch thread with Like.
Just finished working on a 3-25 diaphragm, much thanks to Robert Muncy Sr. I've created a rivet less diaphragm replacement and will be...
-
Woodslasher reacted to heimannm's post in the thread MCCULLOCH The official McCulloch thread with Like.
Jeff (cini5) located this unusual piece of McCulloch for me. I cleaned it up a bit before putting it up in the display area...
-
2171 and 365sp on the bench. 2171 needs transfer cleaned up and new piston. 365 needs a crank, bearings, and top end.
-
Woodslasher reacted to cgraham1's post in the thread Random pics (that you took) thread... with Like.
-
No. Nos
-
Passed the fizz test, the flywheel side fizzes with vinegar while the clutch side does not
-
Another...not a 2100 series but fits :p No aux oiler port but can be drilled as the flip side has the correct channel.