Woodslasher's latest activity
-
2171 and 365sp on the bench. 2171 needs transfer cleaned up and new piston. 365 needs a crank, bearings, and top end. -
Woodslasher reacted to cgraham1's post in the thread Random pics (that you took) thread... with
Like.
-
No. Nos
-
Passed the fizz test, the flywheel side fizzes with vinegar while the clutch side does not
-
Another...not a 2100 series but fits :p No aux oiler port but can be drilled as the flip side has the correct channel.
-
This is the box my magnesium case set came with that’s on my 2101 build 501 56 92 04
-
this is the box the aluminum sided case set came with 501 56 92.63
-
Both the aluminum and my 2101 with the mag have the same half number as well. Tho the box numbers for crankcase sets have different part...
-
I'll strip it. This saw came from EU 1#, 6oz with bearing
-
Another...looks like yours. Had to be a replacement as there was never a plate 2100 vs 2101?
-
An illusion...no worn off paint toward the front.
-
Heres some more differences
-
Weighs in at 2 pounds for the clutch side half alone. Would have weighed my mag sided case but mines already assembled. Anyone have a...
-
Here’s a weird one, 2100 crankcase set with aluminum clutch side case.
-
Woodslasher reacted to redline4's post in the thread Not so pros 4 new and without politics or drama with
Haha.
JB weld should work, right?