Woodslasher's latest activity
-
Woodslasher reacted to Sloughfoot's post in the thread Not so pros 4 new and without politics or drama with
Like.
Tiniest chip of a pebble will stop little wheels dead too. Found that out the dummy way with a shop stool I welded up. Gotta cut the... -
Woodslasher reacted to Wonkydonkey's post in the thread Not so pros 4 new and without politics or drama with Like.
I’ve zoomed in on the second b Pic for you guys as I cut the tail off when I zoomed in on the tarmac
-
Woodslasher reacted to Wonkydonkey's post in the thread Not so pros 4 new and without politics or drama with Like.
We’re just about to take off But while boarding I saw this lovely plane in the background 😉👍
-
-
My fault. It was in a PM, not a thread.
-
I'd put it back together and give it a good whack on either end with a brass hammer. Reinstall the flywheel nut flush with the end of...
-
For what it’s worth, I own 3 562’s and only one 500. I just call it like I see it
-
Do you have a good-sized brass hammer that you can give it a good whack with? Using a punch and a hammer, you're likely not getting...
-
Woodslasher reacted to redline4's post in the thread Not so pros 4 new and without politics or drama with Like.
I'll give it another coat when it warms up this spring.
-
Woodslasher reacted to beaglebriar's post in the thread Not so pros 4 new and without politics or drama with Like.
Afternoon boys. Welded up a cart for the log winch. Been wanting to do this for a while. Nothing special, needs paint but it will make...
-
Woodslasher reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics or drama with Like.
Morena E Hoas.
-
Woodslasher reacted to jacob j.'s post in the thread Not so pros 4 new and without politics or drama with Like.
Happy Birthday @huskihl :flamethrower2:
-
Woodslasher reacted to oddsaws's post in the thread Not so pros 4 new and without politics or drama with
Haha.
Get ‘after’ pics when you bump into them at the baggage claim on your arrival home 😄 -
I straightened a 7900 one after pressing in a new bearing and then welded the pin as well. Actually done it 3 times now none have...
-
Plow disc re-uses? I used a notched edge one for a (short) fan base. I had acquired some serious blowing, 2 ft diam, gable fans. A...