Woodslasher's latest activity
-
Woodslasher reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics or drama with
Like.
Morena E Hoas. -
Woodslasher reacted to jacob j.'s post in the thread Not so pros 4 new and without politics or drama with Like.
Happy Birthday @huskihl :flamethrower2:
-
Woodslasher reacted to oddsaws's post in the thread Not so pros 4 new and without politics or drama with
Haha.
Get ‘after’ pics when you bump into them at the baggage claim on your arrival home 😄 -
I straightened a 7900 one after pressing in a new bearing and then welded the pin as well. Actually done it 3 times now none have...
-
Plow disc re-uses? I used a notched edge one for a (short) fan base. I had acquired some serious blowing, 2 ft diam, gable fans. A...
-
A friend of mine who owns a body shop gave me this can. I did two coats earlier today. We’ll see how this old stuff does. It was...
-
$25 for 8 ounces of POR is not less expensive than $40 for a quart of Red Kote. I have used POR15 in the past and will say that in my...
-
I often pre buy a replacement of what I'm very likely about to ruin. So far my extra cylinder to ruined cylinder ratio is 2:1.
-
I have made broken things more broken. Sad but true.
-
I had a good friend that went blind from juvenile diabetes. He went to Omaha to learn all of the ways to cope with the challenges of...
-
In this particular case I’m not sure, but it’s very common for the crankweights on the lobes to not be lined up perfectly. If you look...
-
Ive discovered that rev limited saws are the most prone to cracking the cases, no matter what size, model or brand. This is most often...
-
Actually, its been the hundred thousand 572's that have lost crank bearings that haunt me the most 🤣🤣😂
-
He probably just got done with 35 562’s though, so🤷🏽♂️😂
-
Woodslasher reacted to ray benson's post in the thread Not so pros 4 new and without politics or drama with Like.
Good morning. Couple inches of Lake Effect snow last night. 19°F/ -7°C going up to 30°F/ -1°C.