Wood Doctor's latest activity
-
I cut firewood for years with a wild thing. Used to cut every day and load a 6 wheeler. My father bought me a husky 55 that I... -
Wood Doctor replied to the thread 024 AV Production year for a salvaged saw.No less than 40 years old. I restored one about 12 years ago.
-
-
Wood Doctor replied to the thread Poulan makes the best saws.On the other hand, go back a few years and check out this one: Poulan 4000. Tough as nails if I do says so.
-
-
More often than not, I see people running them overly rich on the H jet when they do this. It will wet the case and transfers so that...
-
the metering lever is hanging up some how. It is also possible that the check valve in the main jet is not sealing well.
-
Wood Doctor replied to the thread What yer cheap saw favorites?.One of my good friends has a Husky 455. I serviced it once. He loves the saw and uses it all the time. Not cheap: new ones run $600 with...
-
Wood Doctor reacted to hacskaroly's post in the thread Preliminary Carb Settings for New Carb (Stihl 021) with
Like.
I generally do 1 and 1 too and then quarter turn increments after that as needed to get it running good! -
670 on the left 6700 on right. Dayum these things come apart so easy. Still gotta install new seals and a fresh set ah koyo 6202's in...
-
Wood Doctor replied to the thread Stihl 021 Craps Out On Idle.You may also be running low on compression. That 021 Stihl saw could be over 25 years old, made from 1990 to 2002.
-
Like EFSM stated, possible air leak, when it is warm/hot and at idle, it might be pulling more air past say the oil seals and then...
-
Wood Doctor replied to the thread What yer cheap saw favorites?.I sold this Echo CS-4500 a few years back. The new owner loves it and it keeps going and going...: I recall it had a bar oil booster...
-
-
People seem to have no problem giving 100k for a pickup. No way in hell I would come close to giving that
-
Wood Doctor reacted to jacob j.'s post in the thread HELP! Complete List of Every Chainsaw Ever Made by Year, Make, and Model? with Like.
https://www.acresinternet.com/cscc.nsf/GasbyManufacturer?OpenView
-
Still have 1 and a half roll of C83 plus a partial roll of C33 I believe. Since I don't make them I just ask Edwin @Wood Doctor for them...
-
Thanks. I had missed that second part number. I found an Echo tool manual online that references it. The size is given as M10 x 1.0...
