Wilhelm's latest activity
-
I know who that is 😂 -
Wilhelm reacted to huskihl's post in the thread Husqvarna 372 versus Husqvarna 372XPW versus Dolmar 7300 with
Like.
Depends on how they are ported. Could go either way -
Wilhelm reacted to SOS Ridgerider's post in the thread Husqvarna 372 versus Husqvarna 372XPW versus Dolmar 7300 with
Love.
I have a Dolmar 7310 that Kevin @huskihl ported. It’s my go to saw for firewood, and runs absolutely great. It’ll run a 24” bar with... -
Wilhelm reacted to huskihl's post in the thread Husqvarna 372 versus Husqvarna 372XPW versus Dolmar 7300 with Like.
7300 runs a little bit better I believe than a 372 or 372XPW. Not as good as a ported 372
-
Wilhelm reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Yes 61cc super simple saws check piston and cylinder, crank seals and intake block. Only downside is the ignitions go bad and loose...
-
Wilhelm reacted to hacskaroly's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I am quite excited about this saw, don't know anything about it other than it is around the 60cc range.
-
Wilhelm reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
119 is an awesome saw. Almost identical to the 120 basically a different fuel tank and case shape right by the gas cap
-
Wilhelm reacted to hacskaroly's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Love.
@Wilhelm , I finally got my first Dolmar! It is grimy and has some external rust and case rot, but once I got the recoil cover off...
-
Wilhelm reacted to chrissalas1's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Thanks a lot for the replies!!!!
-
Wilhelm reacted to FederalQ's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I should add the original coil is kaput, and this is the replacement Makita part number that’s in it now. What a great saw!
-
-
Wilhelm replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.No coil, no electronics. Current to brushed motor, fantastic! That is locust and a cheap supermarket chain.
-
-
Wilhelm replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Dolmar PS-5105 built after 2010, according to my dealer 181143214 Most likely the exact same part, Makita just keeps messing around...
-
Wilhelm reacted to chrissalas1's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Hi I have a maruyama mcv51 on the bench that needs a new coil.The original one i removed has a code-CDIM 100/6.Does anyone know what is...
-
Wilhelm reacted to FederalQ's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
The original coil in my 5105 is the same code CDIM 100/ 6. Makita P/N:
