Wilhelm's latest activity
-
Wilhelm replied to the thread Stihl oiler upgrades. Please post compatible saws and oilers..Take a NOS brand bar, look at the oil inlet hole (fairly large round hole straight through to the groove and the chains drive links)... -
Wilhelm reacted to hacskaroly's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with
Like.
I use washers, they evenly cover the oil seal and press it in equally, very simple process for people like me with two left hands and... -
Wilhelm reacted to huskihl's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Like mentioned, the flywheel side isn’t so bad. And some clutch sides aren’t bad, depending on how the crank is designed. If there is a...
-
Wilhelm reacted to hacskaroly's post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
Welcome to the forum!! I agree with JJ, if the PTO side is in good shape, no need to touch it, otherwise put the casehalves back...
-
Wilhelm reacted to jacob j.'s post in the thread Question about crank case seals during reassembly after splitting a case - Dolmar 6421 with Like.
If the seal on the PTO side is still in good shape and you've left the crank in that side of the case, then yes, you should not have to...
-
Did anyone miss out on these burrs? Randy accidentally sent me two sets when I paid for just one set. He said I can keep them but I...
-
Wilhelm replied to the thread Stihl oiler upgrades. Please post compatible saws and oilers..Use thinner oil and more of it will get to where it is needed. High viscosity & tacky is not Your friend when it comes to lubrication...
-
Wilhelm replied to the thread Random Thought Of The Day.Reading posts about needing Metric bolts, just to realize/remember You guys are mostly Imperial is mind blowing. Wherever I look I have...
-
-
Philbert
-
-
Looking for a Makita ea6100 crankshaft... Thanks Ernie
-
Wilhelm reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
That conical seat for the flywheel doesn't look right, its surface should be smooth and not as pockmarked as yours. To me it looks like...
-
Wilhelm reacted to ErnieG's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
It's very possible it was ... I purchased the saw with a lot of missing parts so I can't really be sure of its history. Im to far into...
-
Wilhelm replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Have one size smaller thread machined onto it and a custom nut made? Would certainly take a skilled machinist to do it.
-
Wilhelm replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Sorry to say this, but in my book that is now a parts saw. :( If You can find another parts 6100 with a good crank & carb You can...
